CONTACT US
ENLanguage
Category

Bicycle Adventure

360° Loop Bike Ride for FEC & Parks
360° Loop Bike Ride for FEC & Parks

360° Loop Bike Ride for FEC & Parks

Description

Riders pedal a bicycle mounted inside a 360° steel ring, building speed until they swing past the top and loop the full circle. Because it runs on gravity and momentum, the ride needs no motor and almost no power — just a certified steel ring, a bike, and a harness. Every unit is built to your ceiling height and themed to your park.


How the 360° Loop Bike Works

  1. A supervisor straps the rider into a five-point harness with foot cages.

  2. The rider pedals along the inside of the ring and gains height with each pass.

  3. At the top of the swing the bike rolls back down, and the rider builds speed again.

  4. With enough momentum the bike crosses the highest point and completes a full 360° loop.

  5. Releasing the pedals brings the bike smoothly back to the loading platform.




Why Operators Choose It

  • No motor, no hydraulics. There is nothing to power and almost nothing to service — no drive system, no annual motor maintenance, no energy bill.

  • A spectator magnet. The loop is visible from across the hall; guests stop, film, and queue.

  • Compact footprint. Fits a [3.6 m × 3.6 m] area under a [4.2 m] ceiling.

  • One operator. Throughput of roughly [30–40] riders per hour.

  • Turnkey module. Bolts into an existing building or ships as one zone of a complete FEC design.


heming and Customization

Standard themes include Flame (shown), Cyberpunk, Racing, Lava and Crystal. Ring color, floor graphics, backdrop and signage are all produced to your artwork, and printed panels can be replaced later without touching the structure.

  • Powder-coated steel frame with UV-resistant graphics

  • Optional RGB light kit for evening operation

  • Your logo and brand colors applied to the ring, bike and loading area

  • 3D render delivered in [5] working days before production


Safety and Certification

  • Five-point harness, foot retention cages and a secondary safety arm

  • Main structure in [Ø 89 mm × 3 mm] steel tube, tested to [XXX kg] load

  • Anti-slip loading platform and a low-point buffer

  • Tested to [EN 1176 / ASTM F1487 / TÜV], with reports supplied on request

  • Riders must be at least [120 cm] tall and supervised at all times


Send your floor plan and ceiling height, and we will return a 3D layout with a quote within 48 hours.

Inquiry

Related Products

Related News

Contact

Please Leave Your Message

Close

Can
Submit
WhatsApp
Products
Top
WhatsApp

8618875808788

Email

sales@jibaotoy.com

Leave Message Here!
logo