A warehouse can look ideal on a listing and still be a poor fit for a trampoline park. Wide column spacing may leave room for a free-jump court, while a low beam rules out an attraction you planned to put next to it. Or the equipment fits on paper but the venue has too little room for queues, supervision and access. Compare buildings using a measured layout for your attraction mix before you compare rent alone.
Measure from the planned finished floor to the underside of beams, ducts, lights and other overhead services at several points across each proposed activity zone. Then ask the supplier to show the equipment's vertical envelope on a section drawing. An elevated deck changes the height available above the activity. The measurement from the slab to the roof cannot tell you how much clear space remains above the jumping surface or launch point.
Review free jump, dodgeball and any airbag or foam-pit feature separately. Ask for the measurement reference and the clear zones required by the selected design. Have the project team check the proposal against the applicable requirements in your location. For ideas on how the activities differ, see the commercial trampoline park equipment range.
Mark each column's position and size. Include wall offsets, bracing and service risers. Ask the designer to overlay the main court, court boundaries, operator access and guest circulation on that plan. A column can turn a long, open-looking bay into two shorter areas, which changes what fits and how staff can see the activity.
One option is to put the main court in the least interrupted bay and group smaller attractions beside it. Compare that layout with an alternative that uses the same bay for another priority attraction. If your preferred concept depends on moving a column or changing structural bracing, ask the landlord and a structural engineer to review the proposal and its cost before you build it into your business plan.
Start with the gross floor area, then set aside space for reception, queues, toilets, staff and storage rooms, circulation and exits. On what remains, draw each attraction with its entry, waiting area, transition zones and operator positions. Think about the route guests take from check-in to the courts, as well as where parents wait and where staff watch the activity. A space that looks efficient on a drawing may be awkward if two popular attractions share one narrow approach.
For example, imagine a listing with 1,500 m² of gross floor area. After you allocate 350 m² to support spaces and 250 m² to guest circulation and waiting, 900 m² remains as a first-pass activity allowance. That figure still needs a layout test for columns, actual attraction footprints and the space required around them. Use the same assumptions for each site so the comparison stays fair.
Ask the owner for current drawings and information about the slab. Give your engineer and supplier the proposed layout so they can review equipment loads, fixing details and any changes to floor levels. If a concept uses a recessed pit, clarify whether the landlord will permit slab work and what services or structural elements lie below it. Compare it with a raised concept if the slab cannot be altered.
Walk the delivery path from the unloading point to the proposed court. Measure doors and turning points, note any stairs or level changes, and confirm access for installation. Discuss ventilation, electrical supply and overhead service routes with your project team while the layout can still move. Changes to those systems can affect the budget and the vertical space you measured.
Mark the clear height by bay and identify any low obstructions.
Record column spacing and show doors, exits and circulation routes on the plan.
Calculate usable activity space after allowing for support areas and waiting.
List the slab work, service changes and delivery constraints that each concept depends on.
Flag what the supplier, landlord and local project team still need to verify before you commit.
Only as a starting point. Similar attraction lists can need different amounts of space depending on the model sizes, guest circulation, supervision and site geometry. Compare dimensioned layouts based on the same capacity and operating assumptions.
Send a dimensioned floor plan, clear-height measurements, column positions, photos, delivery access details and your attraction shortlist. If the park will combine trampolines with soft play or a ninja course, include the intended age groups and priorities for each zone. Our family entertainment center equipment and solutions page covers mixed-attraction formats.
Explore INJBELL's custom trampoline park solutions or send your drawings and priority attractions to sales@jibaotoy.com. Ask for a layout that identifies where each attraction fits and which building conditions still need to be verified.